Table of Contents
Advertisement
Setting the feed dog
8.1.1 Moving the feed dog carrier in sewing direction
The feed dog carrier is connected to the stitch regulator gear via the sliding
shaft, and can be moved on this shaft.
Cover
• Tilt the machine head ( p. 14)
Fig. 28: Moving the feed dog carrier in sewing direction
(1) - Screw
To move the feed dog carrier in sewing direction:
1. Set the upper stitch length adjusting wheel to 0.
2. Loosen the screw (1).
3. Move the feed dog carrier in the sewing direction such that the feed
4. Tighten the screw (1).
Service Instructions 969 - 06.0 - 03/2019
①
dog is exactly in the center of the throat plate cutout.
41
Advertisement
Table of Contents
