Table of Contents
Advertisement
Command Interface
5.3
Display Current Parameter
The command "Display Current Parameter" can be used to display the parameter of the last issued CIF
command in Un\G1001 to Un\G1066.
If a command caused an error, this function allows the parameter which caused the error to be dis-
played and to make the necessary adjustments to the parameter set and PLC program.
Execution procedure: Display current parameter
● Write the command code 0000
● Turn ON Y(n+1)7 in order to trigger the command execution. If the command execution is finished,
X(n+1)7 will be turned ON.
● When the parameter value of the last executed CIF command has been restored to Un\G1001 to
Un\G1066, 0000
Buffer memory allocation
Address
(Decimal)
1000
1001–1066
Tab. 5-10: Buffer memory allocation when displaying current parameter
5 – 8
to Un\G1000.
H
is displayed to Un\G1000.
H
Description
Transmit message
Command 0
H
Unused
Display Current Parameter
Receive message
0
H
Parameter of last issued CIF command
MITSUBISHI ELECTRIC
Advertisement
Table of Contents
