Programmer Status Led's - Equinox Systems FS2003 User Manual

3.6.5 Programmer Status LED's

The current status of the programmer is displayed on the programmer Status LED's as detailed in the
table below.
Fig. 2.6.5 Programmer Status LED's – state descriptions
Status LED State
Display
WAITING
BUSY
FAIL
PASS
Status LED key:
54
State Description
•
Programmer is now waiting to start an
'Autoprogram' operation.
•
Programmer is 'BUSY' performing a
programming operation.
•
If the programmer is controlled from
EDS, the BUSY LED will remain on
after a programming operation until a
'RESET programmer' command is
executed.
•
Programming operation has FAILED.
•
See programmer LCD for diagnostics
•
Programmer will automatically switch off
target power if it is controlling power.
•
Programming operation was successful.
FS2003 ISP Programmer - User Guide V1.07 – 1
st
September 2007