Isp Header Selection Chart (By Header) - Equinox Systems FS2003 User Manual

4.2 ISP Header Selection Chart (by header)

The FOUR ISP Headers featured on the FS2003 are detailed in the table below. Please refer to the
section indicated in the 'refer to section' column for specific details of each header.
# ISP Description / Function
Header
1 J3 Atmel 6-way ISP Header
Header J6 can have THREE different pin-outs depending on which Target Device is to be
programmed. See (2a), (2b) and (2c).
2a J6(a) Equinox 10-way Header(a)
Device support:
Atmel AT90S, ATmega, ATtiny,
AT89S devices
2b J6(b) Equinox 10-way Header(a)
Device support:
Atmel ATtiny11/12/15
High Voltage (+12V Vpp)
Programming Mode
2c J6(c) Equinox 10-way Header(b)
Device support:
Atmel Wireless T89C51Rx2
Philips P89C51Rx2 / 66x
3 J7 Atmel 10-way Header
Device support:
Atmel AT90S, ATmega, ATtiny,
AT89S devices
FS2003 ISP Programmer - User Guide V1.07 – 1
Refer to ISP Header Pin-out
section
4.4
4.5
4.6
4.7
4.8
st
September 2007 59