Testing An Existing Programming Project In A Project Collection In Eds (Development Mode) - Equinox Systems FS2003 User Manual

•
At the end of the EDS Wizard:
Click the <Test> button
Save the EDS file with an appropriate name eg. ATmega163.eds
The EDS Window will now launch – see section 2.5.4
3.5.3 Testing an existing Programming Project in a Project Collection in
EDS (Development Mode)
If you have already created a Programming Project and want to test it in EDS (Development Mode),
please follow the steps below:
o From the left-hand pane, select <Project Manager>
o Select <Open Collection>
o Browse to and select a Project Collection (*.ppc) file
Project Collection File launches in Project Manager view
o Select the Programming Project you wish to test in EDS
o Click the <Test Project in EDS> button at the bottom right of the Project Manager window
The EDS window now launches with all the settings of the select Programming Project –
o
see section 3.5.4
42 FS2003 ISP Programmer - User Guide V1.07 – 1
st
September 2007