Table of Contents
Advertisement
1.2 Hardware Overview (external layout)
FS2003 ISP Programmer - User Guide V1.07 – 1
Top Panel
ISP Cable Slot
ISP cable plugs into relevant ISP Header internally and
then exits the case through this slot.
Front Panel
<Target Vcc> LED
- Indicates when 'Target Vcc' is ON
- Does not indicate 'Programmer
Status LED's:
<PASS> LED
<BUSY> LED
<FAIL> LED
<NO> Button
- Used to cancel a programming
operation.
<YES> Button
- Used to start an 'autoprogram'
operation.
Bottom Panel
1. RS-232 port (J5)
2. External DC Power Supply Input (CON1)
st
September 2007
Power' unless Jumper J9 is fitted.
11
Advertisement
Table of Contents
