Hardware Installation; Overview; Esd Precautions - Equinox Systems FS2003 User Manual

2.0 Hardware Installation

2.1 Overview

This section details how to set up the programmer hardware including Power Supply, Earthing
Requirements, PC Serial Port Connection and ISP Header Selection.

2.2 ESD Precautions

22
•
Work in a static-free environment.
•
Wear an earthed wrist strap when handling either the programmer
and/or any programmable device.
•
Ensure that the PC, programmer and Target system are connected
to the same EARTH (0V) potential.
•
Do NOT plug the ISP cable of the programmer into a Target
System when the Target power is ON.
•
The programmer I/O lines are ESD protected, but it always good
practice to take proper ESD precautions. This can help to avoid
ESD damage to either the programmer or Target System.
FS2003 ISP Programmer - User Guide V1.07 – 1
st
September 2007