Documentation and software for the ISPnano programmer
In line with our policy of continuous improvement, the software and associated documentation for this
product are updated on a regular basis. You can download the latest software, firmware, User
Manuals and application notes for the ISPnano programmer from the following page on the Equinox
website:
http://www.equinox-tech.com/products/details.asp?ID=1440&displ=tl
You may be asked to register / log in to download some of these files.
Device algorithm - Application notes
The table below lists the Application Notes available for helping to create 'Programming Projects'
for different device families.
Application
Device Family
Note
AN100
Atmel - AT89Sxxxx FLASH microcontrollers
AN101
Atmel - AVR FLASH microcontrollers via the SPI Interface
AN105
Atmel - AVR FLASH microcontrollers via the JTAG Interface
AN118
Generic I2C 24xxx Serial EEPROM memories
AN122
Atmel - AT91SAM7 ARM7 FLASH microcontrollers
AN127
Atmel – XMEGA AVR FLASH microcontrollers via the 2-wire PDI
interface
AN128
NXP – LPCxxx ARM7 FLASH microcontrollers
AN130
Zensys – ZWxxx – Z-WAVE Series
AN132
Atmel ATtiny AVR microcontrollers via the TPI interface
AN133
Atmel AT45D Serial DataFlash programming
AN134
Austriamicrosystems – magnetic encoder programming
AN135
Xilinx Spartan FPGA – external Serial DataFLASH programming
method
These application notes can be found in PDF format on the CD-ROM which was supplied with the
programmer. You can also find the very latest versions on the "ISPnano Download Page" on the
Equinox website.
ISPnano Series IV-ATE Programmer - User Manual - V1.04 – 21/02/2014
Programming
Interface
SPI
SPI
JTAG
I2C
JTAG
PDI
JTAG
SPI
TPI
SPI
AMS 1-wire
SPI
I2C
SPI
xi