Example Of Using Eds - Equinox Systems FS2003 User Manual

3.5.6 Example of using EDS

Here is an example of how to use EDS:
•
Select the <FLASH> tab
•
Click the <Load> button to load a file
•
Click the <Check Sig> button to check the Device Signature of the Target Chip
•
Click the <Write> button to write the data in the Buffer Window to the Target Device
•
Click the <EEPROM> tab to select operations on the EEPROM area of the Target Chip/
•
Click the <Fuses> tab to read / write the Target Chip 'Configuration Fuses'
•
Click the <Security> tab to read / write the Target Chip 'Security Options'
For further instructions about how to use the EDS utility, please refer to the 'EQTools – Getting
Started Guide' which can be found on the CD-ROM supplied with the programmer
46 FS2003 ISP Programmer - User Guide V1.07 – 1
st
September 2007