Testing An Existing Programming Project In A Project Collection In Eds (Development Mode) - Equinox Systems PPM3 MK2 User Manual

•
At the end of the EDS Wizard:
Click the <Test> button
Save the EDS file with an appropriate name eg. ATmega163.eds
The EDS Window will now launch – see section 2.5.4
2.5.3 Testing an existing Programming Project in a Project Collection in
EDS (Development Mode)
If you have already created a Programming Project and want to test it in EDS (Development Mode),
please follow the steps below:
•
From the left-hand pane, select <Project Manager>
•
Select <Open Collection>
•
Browse to and select a Project Collection (*.ppc) file
Project Collection File launches in Project Manager view
•
Select the Programming Project you wish to test in EDS
•
Click the <Test Project in EDS> button at the bottom right of the Project Manager window
•
The EDS window now launches with all the settings of the select Programming Project –
see section 2.5.4
28 PPM3 MKII Programmer - User Guide - V1.04 - 10
th
May 2008