Device Programming Guide - Equinox Systems GEMINI-1 User Manual

User Guide V0.90

Device Programming Guide

The GEMINI-1 Programmer is now ready to program a target device.
In the following example we have chosen to program a Philips P89C51RC+IN microcontroller
located on the user target system.
1 From GEMINI, select <Options> <Create Library
Info>
This operation interrogates the target programmer and generates a
'notepad' document which details information about your
programmer and generates a list of devices supported by the
programmer. From the list you can see which 'TARGET ISP' devices
can be programmed with the GEMINI-1. i.e. only devices listed as
'yes' or LNR' are supported.
2 To select the target device click on the
<Device menu>
Choose <Select>, <Philips>, <Target (ISP)> and finally click on the
desired target device, in our example <P89C51RC+ISP>.
3 From the< Device menu>, select<Information>
This will give you a description of the target device.
4 Setting a target frequency
Select <Options><Target settings> then set F click <OK>
OSC
5 Setting of Baud Rate and COM Port
Select <Options><Select Port>
12