Spectronic 200 Modern Interface; Live Display - Thermo Scientific SPECTRONIC 200 User Manual

SPECTRONIC 200 Modern Interface

Introduction

Live Display

Thermo Scientific
This interface takes full advantage of all the capabilities of the SPECTRONIC 200
spectrophotometer. The modern interface gives access to experiment and display modes not
found in earlier instruments.
Available experiment modes are:
• Live Display*
• Multi Wavelength*
• Quantitative Analysis
• Analyzer (not present in education models)
• Scan
*Education models show absorbance readout to two digits after the decimal point. Industry
models show three digits after the decimal from 0.000A to 0.999A.
Select the mode using left and right keys (
This application is used to measure and display absorption or transmission values in real time.
Figure 9.
1. Use to select (text turns green to show which option is selected) Measurement
Mode and then the
2. Select Measurement λ and use
wavelength.
3. Use the arrow keys to select GO. Press
Figure 10.
).
to toggle between %T or Abs.
or the λ knob to set your desired measurement
to start the Live Display mode as shown in
SPECTRONIC 200E USER GUIDE
SPECTRONIC 200 Modern Interface
SPECTRONIC 200E User Guide 9