Thermo Scientific SPECTRONIC 200 User Manual page 24

SPECTRONIC 200E USER GUIDE
Using the Analyzer Mode
22 SPECTRONIC 200E User Guide
Figure 33.
Select NEXT at the bottom of the screen shown in
editing screen (Figure 34).
Figure 34.
The screen displays as many wavelengths as you specified in the previous menu. Use the
keys to switch between measurement wavelengths. Use the λ knob or
wavelength.
Select the word Enter at the bottom of this screen to advance to the factor entry screen.
Figure 35.
Figure 33 to proceed to the wavelength
to set each
Thermo Scientific