Select Serial Interface - Thermo Scientific RadEye SPRD Operating Instructions Manual

With the buttons Start and Stop together with the polling in-
terval the replay can be controlled.
Close Replay switches back to accessing measurement values
via infrared interface.
The measurement logfile is an ANSI text file with columns
that are separated by <TAB>. This enables this file to be read
easily into other programs (such as Excel) where the data can
be processed.
The first line of the measurement logfile contains the unit
name, the file name, and the path. Serial number and Device
identification are specified on the second line.
Date and time of the measurement are specified in the columns
under the field names "mm.dd.yy" and "hh:mm:ss". The time
setting corresponds to the PC system time.
The "Counter" column contains the numerical value of the
counter measurement. The "Unit" column informs about the
unit. The "Dose Rate" column contains the numerical value of
the dose rate measurement. The "Unit" column informs about
the unit (Sv/h or R/h).
8.3.4

Select serial interface

Via Configuration / Com settings... menu another window is
opened from which you may select the corresponding inter-
face. An error message is displayed if the interface is not
available.
RadEye SPRD DB-100 E 8-7
Pi/Ff 04.11.2014