Thermo Scientific SPECTRONIC 200 User Manual page 19

Thermo Scientific
6. Select Enter on the on-screen keyboard and press the
confirm the file name.
Figure 23.
7. Follow the directions on the screen to continue. The standard graph will be displayed on
the screen (Figure 25).
If no USB memory device is present, the instrument will prompt you to connect one.
NOTICE If the SPECTRONIC 200 does not recognize your USB memory device,
check that it is formatted FAT32. Older USB sticks and sticks of less than 2GB may
be formatted FAT16 (usually labeled simply as FAT).
Figure 24.
SPECTRONIC 200E USER GUIDE
SPECTRONIC 200 Modern Interface
key on the instrument to
SPECTRONIC 200E User Guide 17