Thermo Scientific SPECTRONIC 200 User Manual page 17

Thermo Scientific
The instrument will confirm that it is recording the zero absorbance measurement,
Figure 18.
Figure 18.
Place a cuvette with a blank solution
in the sample compartment and
press the 0.00 button
Please wait Performing Auto Zero...
On completion of the zero measurement, the standard solution editing screen will appear,
Figure 19.
Figure 19.
STD 1
0.00
0.00
STD 2
0.00
STD 3
0.00
STD 4
Use the arrow keys to set the conc
Press enter to measure STD
2. Use to set the concentration of each standard.
3. Press to measure the ABS or %T of that solution.
4. After all standards have been measured the instrument prompts you to press
display the calibration graph.
Figure 20.
2.5
-0.3
Measure sample
ABS
0.00
0.00
ABS
0.00
ABS
0.00 ABS
Save method
SPECTRONIC 200E USER GUIDE
SPECTRONIC 200 Modern Interface
to
SPECTRONIC 200E User Guide 15