Menu 3.3 Boom - Hardi ISOBUS VT Operator's Manual

7 - Menu 3 Calibration
8. Press Enter to see the new value.
9. Press Enter again to accept the new value.

Menu 3.3 Boom

Menu 3.3.1 Width
1. Set boom width.
2. Press Enter to confirm.
Menu 3.3.2 Number of sections
1. Set number of boom sections.
2. Press Enter to confirm.
Menu 3.3.3 Nozzles/sections
1. Set correct number of nozzles per section.
2. Press Enter to continue to next boom section.
3. Press Enter after the last section.
7.6