Technical Specifications; Specifications; Flow Ranges For The Flow Transducers - Hardi ISOBUS VT Operator's Manual

Specifications

Specifications
Supply voltage:
Controlled shutdown "low battery":
Maximum supply:
Maximum peak:
Ambient temperature:
Memory:
Digital transducers (option 2, 3 and 4):
Frequency:
Trigger high:
Trigger low:
Analog transducers (option 1):
Supply:
Input:
Minimum speed for volume regulation

Flow ranges for the flow transducers

Housing Housing identification (A) Flow range
S/67 One outside groove
S/67 No groove
S/67 Two outside grooves
Pressure drop over 13.5 mm orifice is 15 psi at 40 gpm.
12 Volt DC
9 Volt DC
16Volt DC
28 Volt DC
23°F to 158°F (– 5°C to + 70°C)
Flash PROM non-volatile
Square signal
0.5 Hz to 2 kHz
4.0 to 12.0 Volt DC
0.0 to 2.0 Volt DC
12 V
4 to 20 mA
0.3 mph (0.5 km/h)
gpm.
2-30
4-70
20-160

13 - Technical specifications

Orifice PPU
mm value
13.5 485.00
20.0 225.00
36.0 60.00
13.1