Table of Contents
Advertisement
Introduction
About the ISOBUS VT system
The ISOBUS VT is for use in agricultural and horticultural production. The components are developed to last many years
under agricultural conditions.
The system has a non-volatile memory without battery which simplifies storage. All parameters in the menus are saved in
the memory and are not lost when the power is disconnected.
Main components
ISOBUS terminal
HC 6300 Grip
HC 6400 SetBox/Spray Center
HC 6100 JobCom
HC 6200 FluidBox/Outside Box
The transducers utilized are chosen for long service life and good signal quality. The speed and flow transducers have a built-
in diode that will flash to indicate when it's functioning, to aid servicing.
Optional transducers include pressure and revolutions readout. Other options include a 12 Volt printer.
Working pictures will be shown in different colors, depending on the function used.
Display readouts
Among many possible display readouts, are:
• Volume rate.
• Speed.
• Liquid rate per minute.
• Total covered area.
• Total volume sprayed.
• 99 trip registers. It includes a total register that summarizes data from the 98 trip registers.
The system is also compatible with Variable Rate Application (VRA) and is prepared for communication with Precision
Farming tools (e.g. HARDI® AutoSectionControl). Data dump of registers and configuration to a personal computer
are possible.
Functions include
• Correct area with closure of up to 13 spray boom sections.
• Many alarm functions and possibility for audio/visual alarm etc.
• Many warnings depending on operation. Alarms and warnings is shown in the bottom left 1/4 corner of the display
on some VT screens. HC 9500 will show alarms in top of the screen.
Location
Tractor/Self-propelled
Tractor/Self-propelled
Tractor/Self-propelled
Sprayer/Self-propelled
Sprayer/Self-propelled
3 - Description
3.1
Hide quick links:
Advertisement
Table of Contents
