Hc 6300 Grip; General Keystrokes - Hardi ISOBUS VT Operator's Manual

3 - Description

HC 6300 Grip

The Grip is an ergonomic remote unit that can be easily mounted inside
the tractor cabin. All common functions required during normal
spraying can be operated with the Grip. Also the Grip controls some
optional functions.
ATTENTION! The Grip cannot be switched ON/OFF separately. It is
automatically switched ON when tractor power is turned ON
(ISOBUS).
A. Status LED.
B. Boom section controls (up to 13).
C. Main ON/OFF.
D. Tilt.
E. Boom height.
F. Boom slant.
G. Not used.
H. TWIN presets.

General keystrokes

The first steps to choose a menu are shown below. See also "Full menu structure" on page 3.15.
Menu selection
1. Press {Menu} Virtual Terminal button to proceed into the menu.
2. Navigate to desired submenu using arrows.
3. In the menu, the current selection is marked with a colored bar.
4. Move the menu colored bar up and down by using the {up} and
{down} arrows.
÷
NOTE! A maroon colored bar indicates current setting.
5. Confirm selection by pressing the enter arrow.
ATTENTION! Press {ESC} to leave the menu without changing values.
÷
NOTE! There is help text for each menu in the bottom of the display. The displayed help text corresponds to the
location of the colored bar on the Virtual Terminal.
3.8