Multiload Ii/ Rcu Ii Preliminary Configuration - Toptech MultiLoad II EXL Installation Manual

CHAPTER 6– CONFIGURATIONS
Using this same screen as an example, the Processing Mode line is selected and Enter is pressed; use
the Next or Prev keys to toggle between the values ENABLED and DISABLED, as shown below. You
must then press Enter to accept the desired choice.

MultiLoad II/ RCU II Preliminary Configuration

Power-on the MultiLoad II/ RCU II.
1)
When the MultiLoad II is first powered-on, the card–in screen appears, indicating Operating Mode.
2)
An RCU II may initially display "System Unavailable" because it is unconnected to a host system.
62
MultiLoad II/ RCU II Explosion Proof Lite (EXL) Installation Guide - Part # 6070
RCU GENERAL SETUP
RCU Address:
Card Reader:
Processing Mode:
Swing Arn Secondary:
Terminal Name: Toptech Terminal
Security Accounts
Next Prev
RCU GENERAL SETUP
RCU Address:
Card Reader:
Processing Mode:
Swing Arm Secondary:
Terminal Name: Toptech Terminal
Security Accounts
Enter
123█
DISABLD
Remote
DISABLD
Exit Enter
123
DISABLD
Remote
DISABLD
Exit