Manual Revision - Toptech MultiLoad II EXL Installation Manual

CHAPTER 9– REVISION HISTORY

Manual Revision

Revision Date
1.0 (ML) 07/31/2007
1.1 (ML) 02/21/2008
1.2 (ML) 04/18/2008
1.3 (ML) 12/19/2008
1.0 02/26/2009
(RCU)
1.4 (ML) 10/02/2009
1.5 02/18/2011
1.5 03/11/2011
1.5 10/29/2012
10/31/2012
10/31/2012
10/31/2012
10/31/2012
10/18/2013
10/18/2013
04/19/2016
81
MultiLoad II/ RCU II Explosion Proof Lite (EXL) Installation Guide - Part # 6070
Description
Release.
Expanded I/O section to show FCM I and FCM II wiring connections;
described FCM comm. wiring in chapter 4; reorganized serial comm
description by function not port.
Removed FCM diagrams from chapter 4 and placed them in separate
FCM manual.
Added instructions required by update from UL508 to UL61010-1 that
customer is required to use a Class 2 power source when using the DC
power supply; described wiring partitions; described three types of PGM
W&M switches: shaft and magnetic bolts; first release of magnetic
switch construction; added table of torque requirements for all terminal
block plugs used to section 2.3 as required by UL.
Release of RCU II EXL Installation Guide.
Added operating characteristics summary; changed format to mirror the
new MultiLoad II format in the I/O section.
Added wiring diagrams for 2 Meter I/O board; added wiring diagrams for
Lectro Count; added Intertek requirements including Canadian required
French bilingual warnings; combined RCU II EXL and ML II EXL into
common manual; added Canadian IS ground wiring instructions.
Editorial: pp. 3, 28, 70, 72, 73; noted SD Card menu in Chapter 5.
Corrected additive input mistake, updated mechanical drawings showing
slotted card holder
Removed revision number—control by date.
Added Hardware revision table.
Clarified 4-20mA input wiring. Corrected COM2 label errors in diagram.
Updated label, updated warnings, updated European DOC.
Removed the wiring partition (figures 2.5 – 2.7)
Updated EN standards to latest editions.
Revised Declaration of Conformity for 4/20/2016 directive revision.