As-Interface Addresses - Festo MS6N-SV-***-E-ASIS Series Operating Instructions Manual

MS6(N)-SV-...-E-ASIS
6.2.2

AS-Interface addresses

Prior to commissioning, assign the MS6(N)-SV-...-E-ASIS a slave address that is not safety-oriented and
an address of a safety-oriented slave.
The modules or slaves that have been addressed should always be carefully labelled.
Address assignment
The following tables show the assignment of the data bits to the inputs and outputs.
Cyclical digital data
Inputs
n.c. n.c. DI1 DI0
0 0
0 1
1 0
1 1
Tab. 5 Cyclic digital data inputs
Outputs
DO3 DO2 n.c. n.c.
x x
Tab. 6 Cyclical digital data outputs
Cyclical analogue values
O15 ... O0
xxxxxxxxxxxxxxxx
Tab. 7 Cyclical analogue values outputs
O15 ... O0
xxxxxxxxxxxxxxxx
Tab. 8 Cyclical analogue values outputs
Festo – MS6(N)-SV-...-E-ASIS – 1205NH English
Description
Pneumatic status exhaust
Pneumatic status pressurize
Minor error; pneumatic limits exceeded or fallen below
Major error; defect uncovered in the hardware/software
Description
Not used
Description
Pressure p1
Description
Pressure p2
45