Easy Archive
10.2 This is how you create a commissioning archive
10.2
This is how you create a commissioning archive
Overview
Control components can be saved individually or jointly. Creating a separate commissioning
archive for each component is recommended, so that the files can be read in again
independently of each other.
Precondition
The access level "Service" is required.
Creating a commissioning archive
Procedure:
1. Select the "Startup" operating area.
2. Press the menu forward key and then the "Startup archive" softkey.
3. Select the "Create startup archive" option and confirm with "OK".
336
The "Startup" window is opened.
The "Create startup archive" window is opened:
Figure 10-1
Creating a commissioning archive
Commissioning Manual, 02/2012, 6FC5397-3DP40-3BA0
Turning and Milling