This Is How You Enter The Chinese Character - Siemens SINUMERIK 828D Commissioning Manual

Pinyin phonetic spelling <TAB> Chinese character1<TAB> Chinese character2 <TAB> ...
<LF>
<TAB> - tab key
<LF> - line break
Store the created dictionary in one of the following paths:
../user/sinumerik/hmi/ime/
../oem/sinumerik/hmi/ime/
When the Chinese editor is called the next time, this enters the content of the dictionary into
the system dictionary.
Example:
Note
The dictionaries are also stored in the commissioning archive when "HMI data" is selected
(see also: Saving data in archives (Page 334))
3.4.3

This is how you enter the Chinese character

Entering Chinese characters
A character is selected using a phonetic spelling ("pinyin method"): whose sound can be
formed by combining Latin letters.
1. Enter the sound by combining Latin letters.
2. Select the desired character using the cursor keys:
Turning and Milling
Commissioning Manual, 02/2012, 6FC5397-3DP40-3BA0
The editor lists a selection of characters that correspond to that particular sound.
Figure 3-3 Example: Chinese simplified
Operating software settings
3.4 Setting the operating software languages
47