Example: Acknowledgment Steps (Turning Machine) - Siemens SINUMERIK 828D Commissioning Manual

Display in operating software
Figure 9-4
9.7.2

Example: Acknowledgment steps (turning machine)

Acknowledgment steps
Generally, the mechanical sequences on a turning machine are simpler than those for a
milling machine. In the configuration described in the previous chapter without additional
buffer, tool changes can be acknowledged after the mechanical movements without transfer
steps. The PLC user program must detect incoming jobs in the job interfaces and execute
the mechanical movements.
Total acknowledgment to tool management:
Acknowledgment
step
Turning and Milling
Commissioning Manual, 02/2012, 6FC5397-3DP40-3BA0
Turning machine tool list
Acknowledgment bit
-- DB4000.DBX0.0
-- DB4200.DBX0.0
9.7 Application example for turning machine
Transfer step new Transfer step old
tool tool
--
--
Tool management
Status
-- (99)
-- (99)
307