Update_Controls; Addressing The Parameters - Siemens SINUMERIK 828D Commissioning Manual

Easy Extend
8.7 Description of the script language
</timer>
8.7.31

UPDATE_CONTROLS

Description
This identifier performs a comparison between the operator controls and the reference
variables.
Programming
Identifier:
Syntax:
Attributes:
8.7.32

Addressing the parameters

Addressing parameters
Address identifiers for the desired data must be created to address NC variables, PLC
blocks or drive data. An address consists of the subpaths component name and variable
address. A slash should be used as a separating character.
228
<type_cast name="plc_float" convert="float" />
<op> result = plc_float *1.2 </op>
UPDATE_CONTROLS
<update_controls type="<Direction>"/>
type The attribute defines the direction of the data
comparison.
• TRUE The data is read from the reference variables
and copied to the operator controls.
• FALSE The data is copied from the operator
controls to the reference variables.
Commissioning Manual, 02/2012, 6FC5397-3DP40-3BA0
Turning and Milling