Siemens SINUMERIK 828D Commissioning Manual page 124

Commissioning the drive
5.1 Configuring the drive
Procedure
To change the configuration of the drive:
1. You pressed the vertical softkey "Change".
2. Confirm the query with the "Change" softkey.
3. The next dialog tells you which motor is assigned to the drive.
124
Figure 5-56 Change drive
The dialog "Configuration - Motor" is opened and the drive object 3 = Spindle is selected.
Press "Next >".
Press "Next >".
Commissioning Manual, 02/2012, 6FC5397-3DP40-3BA0
Turning and Milling