Parameters - Siemens TX-I/O User Manual

Note
24 / 94
Siemens
Building Technologies
Opens the dialog box Var [<name of the variable table>]
2. Target system > Create link to > Engineered CPU
(or Directly connected CPU or Accessible CPU)
The corresponding link can also be established using the symbols (without
Accessible CPU).
3. Control value column: enter the required value as appropriate
4. Activate the value with the Control value button
5. Query the status value with the Update status value button
6. Save and/or close the table as required
When closing the table a security prompt must be answered accordingly (if
changes were made).
Note
1. The submodule process data can be accessed by means of the E and A
addresses using controllers and VATs (variable tables) of the SIMATIC
Manager. These addresses must be defined beforehand.
2. Only variables from the process image can be viewed.
3. The size of the process image is configured with the properties of the CPU
under the "Cycle/clock marker" tab (separately for inputs and outputs).
4

Parameters

This is a summary. Its purpose is to quickly locate the relevant parameters.
TX-I/O PROFINET BIM V1.0
Parameters
CM110564en_02
23.09.2010