Configuration; Basic Diagnostics; Advanced Diagnostics - Siemens TX-I/O User Manual

Definition, addition
Procedure
Definition, addition
Procedure
Definition, addition
Procedure
66 / 94
Siemens
Building Technologies
5.3.4

Configuration

Command for displaying the configuration data.
At the DOS prompt (PNBIM>) enter: cfgget > return key
Shows the configuration parameters of the TX-I/O BIM; (see the example
below)
1 Continue by entering at the DOS prompt or exit with quit > return key
5.3.5

Basic Diagnostics

Command for running and displaying the basic diagnostics.
1 At the DOS prompt (PNBIM>) enter: diagbasic > return key
Shows the basic diagnostics parameters of the TX-I/O BIM; the following
parameters are listed (see the example below)
 Firmware version
 Hardware version
2 Optional: Exit by entering at the DOS prompt: quit > return key
5.3.6

Advanced Diagnostics

Command for running and displaying the basic diagnostics and for writing the
advanced diagnostics to a file (diagext.file).
The file created with this command can be downloaded via FTP.
1 At the DOS prompt (PNBIM>) enter: diagextended > return key
Shows the parameters of the extended diagnostics of the TX-I/O BIM; the
following parameters are listed:
 Diagnostics alarm list per device/function object/channel
 Exception history (see the following example)
 Log history
TX-I/O PROFINET BIM V1.0
Diagnostics
 CIMI firmware version
 MLFB number
 Serial number
 Ethernet port statistics
CM110564en_02
23.09.2010