Binary Input (Static); Contact; Debounce Time; Display - Siemens TX-I/O User Manual

Representation
Definition, addition
Definition, addition
Parameters
Functional overview
Definition, addition
Parameter
Definition, addition
Mapping for
multicolored LEDs
Only modules TXM1.8D
and TXM1.6R-M
Siemens
Building Technologies
4.1

Binary Input (Static)

BI_STATIC (SIMATIC Manager hardware catalog)
Static binary input = input for detecting/processing static status changes in applied
signals.
A floating contact is connected with the static binary input. The object carries out a
cyclical check at the input. Every change from one stable status to the other is
detected.
4.1.1

Contact

Parameters for defining the contact type.
Possible values Description
NO Contact "Not Open" contact
NC Contact "Not Closed" contact
Status NO contact
Contact position LED
indication
Closed LED on
Open LED off
4.1.2

Debounce Time

Parameter to define the minimum time that the input signal must remain stable in
order to be valid.
Changing the parameter resets an active debounce timer.
Value range Unit
0..255 0.1 s
4.1.3

Display

Parameters for color definition of the meaning of an indication.
As a result, a specific LED color is assigned to each meaning.
Parameter type: [DisplayEnum]
Possible values Description
Normal LED is lit green
Alarm LED is lit red
Service LED is lit yellow
Note
 This parameter is used to assign a LED color to a signal type. After the
configuration, the color remains permanently assigned.
TX-I/O PROFINET BIM V1.0
Parameters
NC contact
Process LED
value indication
1 LED off
0 LED on
Process
value
0
1
25 / 94
CM110564en_02
23.09.2010