The Mapping Function Updown; The Mapping Function Binary; Backup Mode - Siemens TX-I/O User Manual

Definition, addition
Definition, addition
Definition, addition
42 / 94
Siemens
Building Technologies
4.8.2

The Mapping Function UpDown

Parameter for assigning a [MOValue] to
multistate outputs.
The parameter enables multiple outputs at the
same time. Their combination is fixed (and
remains so).
4.8.3

The Mapping Function BINARY

Parameter for assigning a [MOValue] to
multistate switching outputs.
The parameter enables multiple outputs at the
same time. Their combination is fixed (and
remains so).
4.8.4

Backup Mode

Function for control of the behavior of the function when changing to the
"MasterDown" status.
Possible values Description
NO Process value = INACTIVE, 0 (Off)
VALUE Specific value of the parameter [BOBackupValue]
KEEP Save the last active process value
TX-I/O PROFINET BIM V1.0
Parameters
CM110564en_02
23.09.2010