Local Override Channel Mapping - Siemens TX-I/O User Manual

AO – analog output-
configured channels
82 / 94
Siemens
Building Technologies
7.6.2

Local Override Channel Mapping

The table below shows the channel mapping of local override information of AO-
configured channels.
AO channel Offset to input
address
Channel 1 Subslot 2 Byte 0
Channel 2 Subslot 3 Byte 0
Channel 3 Subslot 4 Byte 0
Channel 4 Subslot 5 Byte 0
Channel 5 Subslot 6 Byte 0
Channel 6 Subslot 7 Byte 0
Channel 7 Subslot 8 Byte 0
Channel 8 Subslot 9 Byte 0
TX-I/O PROFINET BIM V1.0
Module Data
Bit 0
Bit 0
Bit 0
The last bit (bit 0–7) in each case is responsible
Bit 0
for the mode (active/inactive) of the local override
function. For details, refer to the appropriate local
Bit 0
override mode parts in Section 4 – Parameters.
Bit 0
Bit 0
Bit 0
CM110564en_02
23.09.2010