1. Manuals
  2. Brands
  3. Directed Manuals
  4. Control Unit
  5. DS4+
  6. Installation manual

Directed DS4+ Installation Manual

2012 hyundai accent. 933.hkht1 3.20.193.1
Hide thumbs Also See for DS4+:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
INSTALLATION GUIDE
DS4+
2012 Hyundai Accent. 933.HKHT1 3.20.193.1
Designed by Installers for Installers
© 2019 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.

Advertisement

Table of Contents
loading

Related Manuals for Directed DS4+

Summary of Contents for Directed DS4+

  • Page 1 2012 Hyundai Accent. 933.HKHT1 3.20.193.1 Designed by Installers for Installers © 2019 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Installation Wiring diagram without OEM alarm and with T-Harness (THHYN3) Wiring diagram with OEM alarm and with T-Harness (THHYN3) Wiring diagram without OEM alarm Wiring diagram with OEM alarm Locating components in the vehicle Vehicle connections Connecting the module Important!
  • Page 3 The following safety warnings must be observed at all times: • Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. • When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never operate the system in an area that does not have adequate ventilation.

  • Page 4: Introduction

    This section lists all the functions compatible with this vehicle for the installation illustrated in this guide. DS4+ Only SmartStart Immobilizer Bypass-Data No Key Req'd Start (Crank) Activation Accessory Activation Tach / RPM Output Ignition Activation Brake Status (foot brake) Remote Start Takeover 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    The Green wire is ONLY required for starter disable and antigrind applications. The EMS COM connection is NOT required in US vehicles without transponder immobilizer. Required ONLY if RAP Off does not operate over data. 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 6: Installation

    DS4+ Connector to open OBDII Cut the Yellow/Black loop for this installation. Legend: Mandatory Connections Security Only Remote Start Only OBDII - Diagnostic 16-pin Conn. Remote Start + Security 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 7: Wiring Diagram With Oem Alarm And With T-Harness (Thhyn3)

    Slide OBDII DS4+ Cut the Yellow/Black loop to open for this installation. Legend: Mandatory Connections Security Only Remote Start Only OBDII - Diagnostic 16-pin Conn. Remote Start + Security 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 8: Wiring Diagram Without Oem Alarm

    (Black 21-pin conn. left Mandatory Connections of junction box.) Security Only (+) Starter: White, pin 3 Remote Start Only Ignition Switch Remote Start + Security (black conn.) (+) Ignition: Pink, pin 4 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 9: Wiring Diagram With Oem Alarm

    Security Only EM01 White, pin 3 Remote Start Only (Black 21-pin conn. left of junction box.) Remote Start + Security (+) Ignition: Pink, pin 4 Ignition Switch (black conn.) 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 10: Locating Components In The Vehicle

    Locating components in the vehicle 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 11: Vehicle Connections

    No Connection H2/13 Violet (+) Door Input No Connection H2/14 Brown (+) Brake Input No Connection H2/15 White/Blue (-) Activation Input No Connection H2/16 Red/Blue (-) Valet switch No Connection 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.
  • Page 12 6 pin plug, pin 3 white Mandatory Connection required for Starter Disable ONLY. H4/7 Violet (+) Starter Output (vehicle side) [3] ignition switch, black 6 pin plug, pin 3 white Mandatory 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.
  • Page 13 (+) 12 Volt Temperature sensor harness, 2-pin black connector (H7) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H7/1 Black Temperature Sensor H7/2 Black Temperature Sensor 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 14: Connecting The Module

    To enable D2D communication between the DS4+ and the SmartStart one of the following actions must be executed: SmartStart with Loops – The brown loop must be cut. • SmartStart with Pigtails – The gray wire must be connected to a ground source. • Loops Pigtails 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 15: When Used In Conjunction With Smartstart

    SmartStart. To ensure proper functionality with SmartStart, it is important that it is selected in the system programming of the DirectLink application or via the online web tool. Note: Both black D2D ports are reserved for the Control Center (antenna) and 8504D Combo Sensor. 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 16: Module Programming

    "Initialize Virtual Tach (not needed with hardwired or data tach applications". * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 17: Programming Without Ft Can & With Hs Can Connections & Without Transponder Immobilizer

    "Initialize Virtual Tach (not needed with hardwired or data tach applications". * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 18: Module Programming For Security-Only Installations

    * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 19: Led Diagnostics And Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to MUX not detected. “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections. Flashes red x 7 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.
  • Page 20 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 21: Soft Reset

    After 3 seconds the LED turns ON solid orange. Keep holding the programming button until & & the LED flashes red, then orange slowly. Solid Flashes Hold Release the programming button. The LED turns ON solid red. & Solid Release 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 22: Learning The Tach (Not Needed With Virtual Tach)

    Important! After successfully learning Virtual Tach, a small minority of vehicle starters may over crank or under crank during remote start. Use the VirtualTach Fine tune feature in the configuration wizard to adjust the starter output time in 50mS increments to compensate for such an occurrence. 933.HKHT1 3.20.193.1 2012 Hyundai Accent © 2019-03-20 Directed. All rights reserved.

  • Page 23: Limited Lifetime Consumer Warranty

    Directed dealer, the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number and address;...

  • Page 24: Quick Reference Guide

    Factory remote. Press the Remote Start button on the transmitter.* • Aftermarket remote. • Directed SmartStart application via your smartphone. & The parking lights will flash once to indicate the Parking lights flash x1 Press Remote vehicle is now in Pit Stop Mode.
  • Page 25 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.

Table of Contents