Directed DIRECTECHS DS3 Plus Installation Manual
Hide thumbs
Also See for DIRECTECHS DS3 Plus:
- Installation manual (35 pages) ,
- Installation manual (26 pages) ,
- Installation manual (27 pages)
Table of Contents
Advertisement
Quick Links
INSTALLATION GUIDE
DS3+ / DS4+
2010 Lincoln MKS. 933.FORD6 3.24.195.3
Designed by Installers for Installers
© 2022 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.
Advertisement
Table of Contents
Related Manuals for Directed DIRECTECHS DS3 Plus
Summary of Contents for Directed DIRECTECHS DS3 Plus
- Page 1 2010 Lincoln MKS. 933.FORD6 3.24.195.3 Designed by Installers for Installers © 2022 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...
-
Page 2: Table Of Contents
Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Installation Wiring diagram with T-Harness (THFON1) Wiring diagram Locating components in the vehicle Key2Go Vehicle connections Module programming 2 Keys required! 1 Key required! Module programming for convenience only (skip transponder) Module programming for security-only installations Pairing remotes Connecting the module... -
Page 3: Introduction
Introduction This guide provides information on the installation of the DS3/DS3+ and DS4/DS4+ modules as a digital solution. Using these modules in a digital configuration require the module to be flashed with vehicle specific firmware. Refer to our website (www.directechs.com) and click on the DIRECTLINK text in the header for additional information. -
Page 4: Vehicle Function Compatibilities
Vehicle function compatibilities This section lists all the functions compatible with this vehicle for the installation illustrated in this guide. Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart. Arm Factory Security Remote Start Takeover Disarm Factory Security SmartStart Door Lock Control... -
Page 5: Pre-Installation And Application Warnings
Pre-installation and application warnings Firmware notes: This section highlights important information for this specific firmware and will assist in pricing accordingly, as well as bringing awareness to any operational or vehicle limitations. T-Harness THFON1 Keys required for Keys required for 1 or 2 compatible programming... -
Page 6: Installation
Wiring diagram with T-Harness (THFON1) Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( P.A.T.S. Ignition Switch 4-pin Connector Connector (connector side) (connector side) Ignition Barrel THFON1 (optional T-Harness for module only) 8-Pin White Connector... -
Page 7: Wiring Diagram
Wiring diagram Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( Ignition Switch P.A.T.S. - 4-pin OBDII Diagnostic (black connector) (at ignition switch) (connector side view) HS CAN High: Pin 6 MS CAN High: Pin 3 TX: Pin 3 RX: Pin 4... -
Page 8: Locating Components In The Vehicle
Locating components in the vehicle Optional starter disable connection When using an external relay, use a 1N4002 diode or larger. This connection is NOT required when using a THFON1 T-Harness. 1A Diode (1N4002+) (+) Ignition (-) Ground When Armed (GWA) Output: Blue/White: 2 Refer to the Vehicle connections section for wire... -
Page 9: Key2Go
Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application. -
Page 10: Vehicle Connections
Vehicle connections The connection information listed below is specific to the 2010 Lincoln MKS. Refer to “Pre-installation and application warnings” for a list of important notes. Data harness, 8-pin white connector (H1) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection... - Page 11 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H2/15 White/Blue (-) Activation (Start Trigger) Input No Connection H2/16 Red/Blue (-) Valet Switch No Connection H2/17 Black/White (-) E-Brake Input No Connection H2/18 Orange/Black (-) Instant Alarm Trigger Input No Connection H2/19 Blue...
- Page 12 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H4/8 Orange (+) Accessory Output No Connection H4/9 Red/White (+) 12 Volt Input No Connection H4/10 Pink (+) Ignition Input/Output No Connection RF Port harness, 2-pin white connector (H5) Module Conn./Pin Color...
-
Page 13: Module Programming
Module programming Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes. 2 Keys required! Security-Only Convenience-Only programming, see next sections. Ensure vehicle is in a safe location, and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral position. - Page 14 You have successfully completed the module programming sequence. 933.FORD6 3.24.195.3 2010 Lincoln MKS ©2022 VOXX•DEI LLC. All rights reserved.
-
Page 15: Key Required
1 Key required! Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral position. DS3+: Connect the 12-pin main power harness to the module FIRST. Wait until the LED turns ON solid red before proceeding to the next step. -
Page 16: Module Programming For Convenience Only (Skip Transponder)
Module programming for convenience features only (skip transponder programming) Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes. To connect the module: Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift is in the neutral position. -
Page 17: Module Programming For Security-Only Installations
Module programming for security-only installations Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes. To connect the module: Please ensure that the vehicle is in a safe location and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral position. -
Page 18: Pairing Remotes
When used in conjunction with Directed SmartStart ® To enable D2D communication between the DS3+/DS4+ and the Directed SmartStart one of the following actions must be performed ® before providing power to the Directed SmartStart unit: ®... -
Page 19: When Used In Conjunction With Smartstart
DO NOT connect the Directed SmartStart ® 2-pin power harness when using the DS3+/DS4+. Power and ground will be provided by the D2D connector on the module. Refer to the Directed SmartStart ® documentation for further details. D2D port configuration Caution! Do not connect the Control Center (antenna) or any digital sensors (8504D) to the white D2D1 port. -
Page 20: Manual Transmission
Manual Transmission IMPORTANT! Directed does not approve nor support installations of manual transmission and remote starts on any electronic vehicles (EV), OEM Remote Start Activation firmware, vehicles with convertibles and/or removable tops, including but not limited to Jeep Wrangler, Honda S2000, Mazda Miata, and other such vehicles. -
Page 21: Led Diagnostics And Troubleshooting
LED diagnostics and troubleshooting This section provides LED diagnostics and troubleshooting information to guide you through the various stages of your installation. Module Programming Description Troubleshooting Make sure the D2D harness is connected and that 12 Volt is present between the red and black wires. If Module has no power. - Page 22 External Module Synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 Active Ground When Running (Status) Description Troubleshooting Ground When Running (Status) command The module has initialized the remote start sequence.
-
Page 23: Soft Reset
Soft reset A module reset will only erase the steps perfomed in “Module Programming”. The firmware and settings flashed to the module will not be affected. Connect all but the If required for your installation, connect all the harnesses to the module, EXCEPT the 12-pin main 12-pin harness power harness. -
Page 24: Tach Learning Procedure (Not Needed With Virtual Tach)
Tach learning procedure (not needed with Virtual Tach) Data Tach: The procedure is not required as the tach comes preprogrammed. However, it is strongly recommended to learn the exact value of the vehicle for the most consistent and reliable starting and functionality. Hardwired Tach: The procedure is required. -
Page 25: Limited Lifetime Consumer Warranty
Limited Lifetime Consumer Warranty VOXX DEI LLC (the Company) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or work- manship within the Lifetime from the date of original purchase in the original vehicle, such defect(s) will be repaired or replaced with new or reconditioned product, (at the Company’s option) without charge for parts or repair labor. -
Page 26: Quick Reference Guide
Factory remote. Press the Remote Start button on the transmitter.* • Aftermarket remote. • Directed SmartStart application via your smartphone. & The parking lights will flash once to indicate the Parking lights flash x1 Press Remote vehicle is now in Pit Stop Mode. - Page 27 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.