Remote Programming With Mct 10 Set-Up Software Set-Up Software - Danfoss VLT AutomationDrive FC 300 Instruction Manual

About Adjustable Frequency ...
5.6 Remote Programming with MCT 10 Set-
up Software Set-up Software
Danfoss has a software program available for developing,
storing, and transferring adjustable frequency
driveprogramming. The MCT 10 Set-up Software allows the
user to connect a PC to the adjustable frequency drive and
perform live programming rather than using the LCP.
Additionally, all adjustable frequency drive programming
can be done off-line and simply downloaded to the
adjustable frequency drive. Or the entire adjustable
frequency drive profile can be loaded onto the PC for
backup storage or analysis.
The USB connector or RS-485 terminal is available for
connecting to the adjustable frequency drive.
MCT 10 Set-up Software is available for free download at
www.VLT-software.com. A CD is also available by
requesting part number 130B1000. A user's manual
provides detailed instructions for operation.
VLT ® AutomationDrive Instruction
Manual
®
MG33AL22 - VLT is a registered Danfoss trademark
5 5
5-9