Remote Programming With Mct 10 Set-Up Software - Danfoss VLT AutomationDrive FC 303 Instruction Manual

About Adjustable Frequency ...
5.6 Remote Programming with MCT 10 Set-
up Software
Danfoss has a software program available for developing,
storing, and transferring Adjustable frequency drive
programming. The MCT 10 Set-up Software allows the user
to connect a PC to the Adjustable frequency drive and
perform live programming rather than using the LCP. Also,
all Adjustable frequency drive programming can be done
off-line and simply downloaded into Adjustable frequency
drive. Or the entire Adjustable frequency drive profile can
be loaded onto the PC for backup storage or analysis.
The USB connector or RS-485 terminal are available for
connecting to the Adjustable frequency drive.
MCT 10 Set-up Software is available for free download at
www.VLT-software.com. A CD is also available by
requesting part number 130B1000. A user's manual
provides detailed instructions.
VLT ® AutomationDrive Instruction
Manual
®
MG.33.AI.22 - VLT is a registered Danfoss trademark
5 5
5-9