Remote Programming With Mct 10 Set-Up Software - Danfoss VLT FC 103 Operating Instructions Manual

P P rogramming
VLT Refrigeration Drive Operating Instructions
5.6 Remote Programming with MCT 10 Set-
up Software
Danfoss has a software program available for developing,
storing, and transferring frequency converter
programming. The MCT 10 Set-up Software allows the user
to connect a PC to the frequency converter and perform
live programming rather than using the LCP. Additionally,
all frequency converter programming can be done off-line
and simply downloaded to the frequency converter. Or the
entire frequency converter profile can be loaded onto the
PC for back up storage or analysis.
5 5
The USB connector or RS-485 terminal are available for
connecting to the frequency converter.
MG16J102 - VLT is a registered Danfoss trademark 45
inverter.ru (812) 702-47-50