How To Operate; Remote Programming With Mct 10 Set-Up Software - Danfoss VLT FC 103 Operating Instructions Manual

User Interface

4.4 How to Operate

4.4.1 Five Ways of Operating
T T he frequency converter can be operated in 5 ways:
1. Graphical Local Control Panel (GLCP)
2. RS-485 serial communication or USB, both for PC
connection
3. Via AK Lon Gateway AKM programming
software
4. Via AK Lon
4 4
programming software
5. Via MCT 10 Set-up Software, see 4.5 Remote
Programming with MCT 10 Set-up Software
If the frequency converter is fitted with fieldbus option,
refer to relevant documentation.
NOTE
The AKM programming software can be downloaded from
www.danfoss.com
4.5 Remote Programming with MCT 10 Set-
up Software
Danfoss has a software program available for developing,
storing, and transferring frequency converter
programming. The MCT 10 Set-up Software allows the user
to connect a PC to the frequency converter and perform
live programming rather than using the LCP. Additionally,
all frequency converter programming can be done off-line
and simply downloaded to the frequency converter. Or the
entire frequency converter profile can be loaded onto the
PC for back up storage or analysis.
The USB connector or RS-485 terminal is available for
connecting to the frequency converter.
MCT 10 Set-up Software is available for free download at
www.VLT-software.com. A CD is also available by
requesting part number 130B1000. For further information,
see the Operating Instructions.
40
inverter.ru (812) 702-47-50
VLT Refrigeration Drive FC 103 1.1-90 kW Operating Instructions
system manager service tool
MG16E202 - VLT® is a registered Danfoss trademark