B4.2 Signal Connections For Dn-8468D - ICP DAS USA I-8094 Getting Started Manual

B4.2 Signal Connections for DN-8468D

Maintaining signal connections is one of the most important factors in ensuring that your
application system is sending and receiving data correctly.
Pin Assignment for CON1
The I/O connector on the DN-8468D is a 68-pin SCSI II connector that enables you to connect
to the I-8094 motion card. Fig. 3-2 shows the pin assignment for the 68-pin I/O connector on
the DN-8468D (or on the I-8094), and refer to Table 3-2, 3-3 for description of each motion I/O
signal.
Fig. 3-2 I/O connector pin assignment for the CON1
94
http:/www.icpdas.com I8094Getting Started ManualVer.2.3 2008/4/28