Build The Project; Download And Run - ICP DAS USA I-8094 Getting Started Manual

Pac motion control module

Table of Contents

'Please check the ERROR CODE

'Get X ERROR CODE

KK = Convert.ToInt32(i8094MF.i8094MF_GET_ERROR_CODE(cardNo, AXIS_X))

'Get Y ERROR CODE

KK = Convert.ToInt32(i8094MF.i8094MF_GET_ERROR_CODE(cardNo, AXIS_Y))

'Get Z ERROR CODE

KK = Convert.ToInt32(i8094MF.i8094MF_GET_ERROR_CODE(cardNo, AXIS_Z))

'Get U ERROR CODE

KK = Convert.ToInt32(i8094MF.i8094MF_GET_ERROR_CODE(cardNo, AXIS_U))

'====================================

End If

Please refer to a example " demo_First"

4.2.5 Build the Project

Please select the "Build" -> "Build Solution" in pull-down menu, then you will be finished

this example program if there isn't any wrong.

Please copy the "Demo_First.exe", "I8094.dll" and "I8094_NET.dll" into the same floder

of WinCon ( User can use the VS.NET Online Download/FTP/USB disk to do), then

execute it.

http:/www.icpdas.com

I8094Getting Started ManualVer.2.3 2008/4/28

Table of Contents

I-8094f