Technical Specifications; Applicability Of Technical Specifications; General Technical Specifications - Siemens SIMATIC IPC627E Operating Instructions Manual

Technical specifications

8.1

Applicability of technical specifications

Note
The following technical specifications only apply under the following conditions:
• The device is in good working order.
• The device is closed.
• The I/O devices fulfill the requirements for the respective area of application (interference
emission according to EN 61000-6-3 / IEC 61000-6-3, interference immunity according to
EN 61000-6-2 / IEC 61000-6-2).
8.2

General technical specifications

See the note under "Validity of the technical specifications (Page 109)".
Article number
Dimensions
Weight
Supply voltage AC
Supply voltage DC
Input current AC
Input current DC
Supply voltage frequency
Short-term voltage interruption in
accordance with Namur
Max. power consumption AC and
DC
Noise emission
Degree of protection
Quality assurance
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
6AG4131-3....-.... (for details, refer to the ordering documenta-
tion)
Device with two expansion slots:
295 × 265 × 93 (W × H × D in mm)
Device with five expansion slots:
295 x 265 x 155 (W × H × D in mm)
Device with two expansion slots:
approx. 5 kg
Device with five expansion slots:
approx. 7 kg
Nominal 100-240 V AC (-15% / +10%) (wide range)
Nominal 24 V DC (-20% / + 20%), SELV
1
Continuous current up to 1.7 A (up to 50 A for 1 ms at startup)
Continuous current up to 7.1 A (up to 13 A for 50 ms at startup)
50-60 Hz (47 to 63 Hz)
max. 20 ms (at 93 to 264 V)
(max. 10 events per hour; recovery time at least 1 s)
Active power 176 W
< 55 dB(A) according to EN ISO 7779
IP 20 to IEC 60529
In accordance with ISO 9001
8
1
109