6.2
Expansion cards
6.2.1
Usable expansion cards
Expansion cards compliant with the following standards are supported:
● PCI; Rev 2.3 Expansion cards with 3.3 V and 5 V supply voltage can be used.
● PCIe; Gen. 1, Gen. 2, Gen. 3
Conditions of use of expansion cards
● The expansion cards must not exceed the specified dimensions. If the height is
exceeded, you may experience contact problems, malfunctions and difficulties with the
assembly.
You can find the permitted dimensions for expansion cards under "Dimension drawing of
the expansion cards (Page 129)".
See also
Expansion card slots on the bus board (Page 139)
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
Expanding and assigning parameters to the device
6.2 Expansion cards
73