Installing The Device; Installation Guidelines - Siemens SIMATIC IPC627E Operating Instructions Manual

3.2

Installing the device

3.2.1

Installation guidelines

Procedure during installation and mounting
Dangerous voltage and fire hazard
Improper actions during installation and assembly may lead to personal injury and/or
substantial damage to equipment.
You should observe the installation and assembly notes under:
• Notes on mounting (Page 30)
• Notes on ambient and environmental conditions (Page 30)
Securing the device
NOTICE
Insufficient load carrying capacity
If the wall it is mounted on does not have a sufficient load-bearing capacity, the device may
fall and be damaged.
• Ensure that the mounting surface on the wall can bear four times the total weight of the
NOTICE
Incorrect fixing elements
The device may not be securely fitted if you use screws other than those specified below
for mounting. The device can fall and may be damaged.
• Use only the specified screws.
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
WARNING
device, including fixing elements.
Installing and connecting the device
3.2 Installing the device
39