Checking The Delivery Package - Siemens SIMATIC IPC627E Operating Instructions Manual

3.1.2

Checking the delivery package

Electric shock and fire hazard due to damaged device
Damaged devices due to improper storage or transport may lead to personal injury and/or
substantial damage to equipment.
• You must observe the warnings in "Note on transport and storage (Page 29)".
Procedure
1. Check the delivery unit for any signs of visible transport damage.
If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
2. Unpack the device at its installation location.
3. Keep the original packaging in case you have to transport the unit again.
4. Check the Scope of delivery (Page 35) and any accessories you may have ordered for
completeness and damage.
Please inform the delivery service immediately if the package contents are incomplete or
damaged or do not correspond with your order. Fax the enclosed form "SIMATIC IPC/PG
Quality Control Report".
5. Please keep the documentation in a safe place. It is required for initial commissioning and
is part of the device.
6. Note down the Identification data of the device (Page 38).
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
WARNING
Installing and connecting the device
3.1 Preparing for installation
37