Technical specifications
8.8 Technical specifications of graphic
8.8
Technical specifications of graphic
See the note in "Applicability of technical specifications (Page 109)".
Graphics controller
Graphics memory
Resolutions/frequencies/colors
8.9
Technical specifications of the interfaces
Observe the information in "Applicability of technical specifications (Page 109)" and use only
original connections of the I/O to be connected.
DisplayPort
DVI-D
Keyboard
Mouse
USB
Ethernet
COM1
Free slots for expansion
cards (see Motherboard
(Page 135))
For unique labeling, the Ethernet ports are numbered on the enclosure. The numbering by the
1
operating system can differ.
No teaming with AMT.
2
When using AMT, the interface X1P1 must be used for connection to remote maintenance.
3
An analog monitor can be used with an adapter cable (optional).
4
118
•
•
•
32 - 4 GB Shared Memory
DVI: 640 × 480 to 1920 × 1200 / 80 Hz / 24 bit
DisplayPort: max. 3840 ×2160 / 130 Hz / 30 bits
2 x connection of DisplayPort monitor
4
Connection of DVI monitor, with adapter also VGA monitor
USB support
USB support
4 × USB 3.1, type A, high current, backward compatible
2 × USB 3.1, type C, high current, backward compatible
3 × Ethernet interface (RJ45), 10/100/1000 Mbps
1
1 x Ethernet 1: Intel® Jacksonville i219-LM; AMT-capable
•
2 x Ethernet 2, 3: Intel® Springville i210-AT
•
Wake on LAN, Remote Boot and the following Teaming modes are
supported:
Adapter Fault Tolerance (AFT)
•
Adaptive Load Balancing (ALB)
•
IEEE 802.3ad Dynamic Link Aggregation (DLA)
•
Static Link Aggregation (SLA)
•
Switch Fault Tolerance (SFT)
•
RS232, 115 kbps max., 9-pin SUB-D, male
Versions with 2 and 5 PCI(e) cards
Core i7: Intel® UHD Graphics 630
Core i3: Intel® UHD Graphics 630
Celeron: Intel® UHD Graphics 610
Operating Instructions, 12/2018, A5E44297201-AA
4
SIMATIC IPC627E