Siemens SIMATIC IPC627E Operating Instructions Manual page 19

⑨
2 × USB
X64/X65
⑩
24 V DC
⑪
On/off switch
⑫
PCI/PCIe expansion
cards,
USB on expansion
card (optional)
⑬
Fixing screws for strain
relief
Device with USB expansion (optional)
The following expansion cards are located at the position of the cover
①
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
USB 3.1 Gen. 2 Type A high current, backward compatible with USB 3.0/2.0/1.1
Power supply connection
You switch on the device with the on/off switch. This requires that the BIOS setup entry
"State After G3" is set to "S0 State (=Always On)".
The on/off switch does not isolate the device from the power supply. Position "ON", when
the "-)" symbol is pressed inward on the device. Position "OFF" is the delivery state.
5 slots for expansion cards (Slot1/X101, Slot2/X102, Slot3/X103, Slot4/X104, Slot5/X105)
USB X66, X67
Product description
1.4 External design of the device
⑫
in the figure above:
19