External Design Of The Device; Front Panel - Siemens SIMATIC IPC627E Operating Instructions Manual

Product description

1.4 External design of the device

1.4 External design of the device
1.4.1

Front panel

Device with two expansion slots
①
On/off button
②
4 status LEDs
③
COM1 X30
④
DVI/VGA X70
⑤
DisplayPort
X71/X72
⑥
3 × Ethernet
X1P1/X2P1/X3P1
⑦
2 × USB
X61/X63
16
The on/off button has three functions:
Switch on the PC: Briefly press once
•
Shut down operating system and switch off PC: Briefly press once
•
Switch off PC without shutting down the operating system (hardware reset): Press for
•
more than 4 seconds.
Note: The BIOS setup entry "State After G3" is preset to "S0 State (=Always On)". This
means the device is switched on with the on/off switch. You then do not need to press the
on/off button.
Status display of the operating state (Page 21)
Serial interface
DVI-D connection for CRT or LCD monitor with DVI port
DisplayPort connection for digital monitor
X1P1, left: RJ45 Ethernet port 1 (exclusive PCI interrupt) with 10/100/1000 Mbps, iAMT
•
capable
X2P1, center: RJ45 Ethernet port 2 (shared PCI interrupt) with 10/100/1000 Mbps
•
X3PI, right: RJ45 Ethernet port 3 (shared PCI interrupt) with 10/100/1000 Mbps
•
USB 3.1 Gen. 2 Type C high current, backward compatible with USB 3.0/2.0/1.1
Operating Instructions, 12/2018, A5E44297201-AA
SIMATIC IPC627E