Siemens SIMATIC IPC627E Operating Instructions Manual page 78

Expanding and assigning parameters to the device
6.3 Memory modules
Removing a memory module
Note
Also observe the order for equipping the memory modules described above when removing
the memory modules.
1. Loosen the locking mechanisms on the left
2. Remove the memory module from the slot.
3. Close the device.
Display of a changed memory configuration
A new memory module is automatically detected. When switching on the device and starting
the BIOS Setup using <F2>, the current memory size is displayed under "Total Memory".
See also
General safety instructions (Page 27)
78
② ③
and right of the slot.
Operating Instructions, 12/2018, A5E44297201-AA
SIMATIC IPC627E