7.3.2
Replace power supply fan
Requirements
● The device is disconnected from the voltage supply and all connecting cables have been
unplugged.
● The device is open, see important information regarding this under Opening the Device
(Page 71).
● An original spare part, that is a fan of the same type, see information under Accessories:
Hardware (Page 24).
Procedure - Removal
1. Remove the four plastic rivets on the enclosure and remove the marked screw
2. Pull the power supply connector and remove the marked screws.
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
Device maintenance and repair
7.3 Removing and installing hardware
①
.
93